100A SBEC Brushless ESC



Item may not be exactly as shown as the manufacturer changes the covering frequently



Favourite 100A SBEC Brushless Electronic Speed Controller

 ESC stands for Electronic Speed Controller.  It is an electronic motor controller which controls the speed, direction and possibly braking of a motor.

BEC stands for Battery Eliminator Circuit.  In radio control contexts, the BEC is extra circuitry on the ESC to provide power to the controls (such as steering, servos, receivers) to the controlled vehicle so that this control circuitry does not need to carry it's own battery pack.  That is, it piggy backs on the battery pack used to drive the motors of the vehicle or in other words, the motor and servos share the same battery pack.

SBEC usually stands for Switching Battery Eliminator Circuit.  SBEC's are improved versions of BECs as the circuitry uses batter power more efficiently.



Output: continuous 100A, Burst 150A up to 10 seconds

Input voltage: 2-6 cells lithium battery or 5-18 cells NiCd/NiMh battery

BEC: 6.0A/ 5 V switching mode BEC

Max Speed:210000rpm for 2 Poles BLM, 70000rpm for 6 poles, 35000rpm for 12 poles BLM (BLM=Brushless


Size: 71mm*35mm*22mm

Weight: 95 grams (including heat-dispense pad)

(Not as shown in picture - May have an orange covering)




BEEP1 Short2 Short3 Short
Battery TypeNiMh/NiCdLi-ion/NiCd 
Cutoff ModeReduceCut-off 
Cutoff ThresholdLowMedium High
Motor TimingLowMedium           High                  
Start up Acceleration         Very Soft           SoftNormal
Governor ModeRPM OffRPM On 
Motor RotationForwardReverse 
Default SettingRestore  

 How to use a Servo Tester on an ESC