Blue Heat Shrink Covering



Blue Heat Shrink Covering

Iron on heat shrink filament. Easy to work with, stretches around corners and curves easily without creasing. Lower heat needed and therefore a higher melting point. Comes in a variety of colors. A great quality, economical alternative for the builders out there.

25 inches by 6 feet long

*****Please be sure to test a sample first as your iron may heat differently*****



  • Super strong with a tensile strength of approx. 25,000 psi
  • Lightweight
  • Dry adhesive is activated when heat is applied
  • Molds crease free around compound curves and into corners
  • High gloss finish
  • Waterproof
  • Fuel proof

This material is designed for models constructed with balsa wood.


Apply with a hobby covering iron

We recommend using a ‘sock’ on the iron to prevent scuffing and dulling of the surface.

NOTE: all irons are different, test first.  Begin with a low temperature and increase until film adheres to the wood

Note: All colors react differently and heat may need to be adjusted with each color

Corners – heat film then pull and stretch around the corner carefully.  Iron to wood.  Creases can be smoothed with the iron or a heat gun.

Once adhered, a heat gun may be used to tighten the finished product.